WONBIOGEN

Meditouch Liquid

Intended Use: Prevention from Contamination and protection of low exudate wounds

How to use: 1. Preparations before use
1) Use after cleaning the wound (affected part).
2) Read the user manual carefully before use.
3) Check whether the validity period has elapsed before use.
4) Shake the product well before use.

2. How to use
1) Clean the wound and application area (remove foreign substances, etc.)
2) Apply this product evenly and thinly, slightly wider than the wound area. (The wound may sting slightly.)
3) Let the applied part of this product dry well. (If you use wind, it dries more effectively.)
4) If touched while rubbing or drying for a long time, the liquid hardens and clumps, making it difficult to form a film. (Do not touch for up to 10 minutes after application)
5) After a certain amount of time has elapsed after film formation, the edge will become white. If you want to replace it, remove it from the edge. If you want to keep it longer, apply it again.

3. How to store after use
1) This product contains volatile components, so if the lid is not completely closed, the product may harden due to exposure to the air.
2) After use, the brush is not washed in water. (If the contents come in contact with water, it may harden.)
3) If water gets into the product, the contents may harden, so be careful not to get water into the container during use or storage.

Precautions: (1) General precautions
1) Do not consciously inhale the contents.
2) Before the applied product dries, do not touch the applied wound or water.
3) If applied to oily areas such as palms or soles, it can be easily peeled off.
4) Apply it to the wound and let it dry completely before moving.

(2) Precautions for application
1) Do not apply to the eyes.
2) Inhalation and use are prohibited.
3) Do not apply to the mucous membrane area.
4) Do not apply to wounds with pus.

Storage: Avoid direct sunlight and high humidity, and store at room temperature (1~30℃).

Product Specification